- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
0.4331"Ø(11mm) x 25mm LOC x 76mm OAL- Ballnose - Uncoated - MG2 2F End Mill
Flutes: 2Cutting Diameter: 11mm (0.4331in)Length of Cut: 25mm (0.984in)Overall Length: 76mm (2.992in)Shank Diameter: 11mm (0.433in)End Style: BallnoseCAD$44.67The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4331"Ø(11mm) x 25mm LOC x 76mm OAL- Ballnose - Uncoated - MG4 4F End Mill
Flutes: 4Cutting Diameter: 11mm (0.4331in)Length of Cut: 25mm (0.984in)Overall Length: 76mm (2.992in)Shank Diameter: 11mm (0.433in)End Style: BallnoseCAD$44.67The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4331"Ø(11mm) x 25mm LOC x 76mm OAL- Square End - Uncoated - MG4 4F End Mill
Flutes: 4Cutting Diameter: 11mm (0.4331in)Length of Cut: 25mm (0.984in)Overall Length: 76mm (2.992in)Shank Diameter: 11mm (0.433in)End Style: SquareCAD$40.91The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 0.625" LOC x 2.75" OAL - 0.03" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 0.625"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: 0.03" Corner RadiusCAD$40.77The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.4375"Øx 0.625" LOC x 2.75" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 0.625"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: BallnoseCAD$30.40The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 0.625" LOC x 2.75" OAL- Square End - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 0.625"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$37.96The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.4375"Øx 0.625" LOC x 2.75" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 0.625"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$30.40The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 0.75" LOC x 2.25"Reach x 4" OAL- Ballnose - TiAlN Coated - 271 2F Carbide Hard Mill
Flutes: 2Cutting Diameter: 0.4375"Length of Cut: 0.75"Overall Length: 4"Shank Diameter: 0.5"End Style: BallnoseCAD$85.85The 271 series is designed for surfacing applications that require long reach in hardened materials <65Rc. Engineered robust cutting geometry featuring a large core diameter and slow helix angle to maximize tool life. -
0.4375"Øx 1" LOC x 2.75" OAL - 0.03" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: 0.03" Corner RadiusCAD$43.59The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.4375"Øx 1" LOC x 2.75" OAL - 0.03" Rad - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: 0.03" Corner RadiusCAD$48.28The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.4375"Øx 1" LOC x 2.75" OAL - 0.03" Rad - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: 0.03" Corner RadiusCAD$50.17The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.4375"Øx 1" LOC x 2.75" OAL- Ballnose - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: BallnoseCAD$43.20 -
0.4375"Øx 1" LOC x 2.75" OAL- Ballnose - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: BallnoseCAD$46.23The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4375"Øx 1" LOC x 2.75" OAL- Ballnose - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: BallnoseCAD$49.14The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.4375"Øx 1" LOC x 2.75" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: BallnoseCAD$32.27The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.4375"Øx 1" LOC x 2.75" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: BallnoseCAD$36.03The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 1" LOC x 2.75" OAL- Square End - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$40.77The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.4375"Øx 1" LOC x 2.75" OAL- Square End - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$46.40The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.4375"Øx 1" LOC x 2.75" OAL- Square End - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$42.47The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4375"Øx 1" LOC x 2.75" OAL- Square End - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$50.17The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.4375"Øx 1" LOC x 2.75" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$32.27The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4375"Øx 1" LOC x 2.75" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1"Overall Length: 2.75"Shank Diameter: 0.4375"End Style: SquareCAD$32.27The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 1.5" LOC x 6" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.4375"Length of Cut: 1.5"Overall Length: 6"Shank Diameter: 0.4375"End Style: BallnoseCAD$54.79The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.4375"Øx 1.5" LOC x 6" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 1.5"Overall Length: 6"Shank Diameter: 0.4375"End Style: SquareCAD$54.79The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 2" LOC x 4" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.4375"Length of Cut: 2"Overall Length: 4"Shank Diameter: 0.4375"End Style: SquareCAD$48.33The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4375"Øx 2" LOC x 4" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 2"Overall Length: 4"Shank Diameter: 0.4375"End Style: SquareCAD$48.33The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 2" LOC x 6" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.4375"Length of Cut: 2"Overall Length: 6"Shank Diameter: 0.4375"End Style: SquareCAD$61.36The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4375"Øx 3" LOC x 6" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.4375"Length of Cut: 3"Overall Length: 6"Shank Diameter: 0.4375"End Style: BallnoseCAD$281.10The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.4531"Øx 1" LOC x 3" OAL- Ballnose - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.453125"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$48.78The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4531"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.453125"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$42.34The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.4531"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.453125"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$38.58The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4531"Øx 1" LOC x 3" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.453125"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$38.58The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4531"Øx 1" LOC x 3" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.453125"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$38.58The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4688"Øx 1" LOC x 3" OAL- Ballnose - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.46875"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$48.78The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4688"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.46875"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$42.34The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.4688"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.46875"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$38.58The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4688"Øx 1" LOC x 3" OAL- Square End - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.46875"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$48.78The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4688"Øx 1" LOC x 3" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.46875"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$38.58The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4688"Øx 1" LOC x 3" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.46875"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$38.58The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4724"Ø(12mm) x 25mm LOC x 75mm OAL- Square End - Uncoated - MG2 2F End Mill
Flutes: 2Cutting Diameter: 12mm (0.4724in)Length of Cut: 25mm (0.984in)Overall Length: 75mm (2.953in)Shank Diameter: 12mm (0.472in)End Style: SquareCAD$39.22The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4724"Ø(12mm) x 25mm LOC x 76mm OAL- Ballnose - Uncoated - MG2 2F End Mill
Flutes: 2Cutting Diameter: 12mm (0.4724in)Length of Cut: 25mm (0.984in)Overall Length: 76mm (2.992in)Shank Diameter: 12mm (0.472in)End Style: BallnoseCAD$42.98The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4724"Ø(12mm) x 25mm LOC x 76mm OAL- Ballnose - Uncoated - MG4 4F End Mill
Flutes: 4Cutting Diameter: 12mm (0.4724in)Length of Cut: 25mm (0.984in)Overall Length: 76mm (2.992in)Shank Diameter: 12mm (0.472in)End Style: BallnoseCAD$42.98The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4724"Ø(12mm) x 25mm LOC x 76mm OAL- Square End - Uncoated - MG4 4F End Mill
Flutes: 4Cutting Diameter: 12mm (0.4724in)Length of Cut: 25mm (0.984in)Overall Length: 76mm (2.992in)Shank Diameter: 12mm (0.472in)End Style: SquareCAD$39.22The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4844"Øx 1" LOC x 3" OAL- Ballnose - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.484375"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$48.78The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4844"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.484375"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$42.34The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.4844"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.484375"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$38.58The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.4844"Øx 1" LOC x 3" OAL- Square End - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.484375"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$48.78The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.4844"Øx 1" LOC x 3" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.484375"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$38.58The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.4844"Øx 1" LOC x 3" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.484375"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$38.58The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 0.625" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$52.39The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 0.625" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$54.43The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.5"Øx 0.625" LOC x 3" OAL - 0.03" Rad - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$46.18The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 0.625" LOC x 3" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$39.02The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 0.625" LOC x 3" OAL- Square End - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$49.32The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 0.625" LOC x 3" OAL- Square End - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$52.39The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.5"Øx 0.625" LOC x 3" OAL- Square End - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$42.09The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 0.625" LOC x 3" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$39.02The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.5"Øx 0.625" LOC x 3" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 0.625"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$39.02The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 0.75" LOC x 2.5" OAL - 0.03" Rad - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 0.75"Overall Length: 2.5"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$58.54The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.5"Øx 0.75" LOC x 4" OAL- Ballnose - TiAlN Coated - 271 2F Carbide Hard Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 0.75"Overall Length: 4"Shank Diameter: 0.5"End Style: BallnoseCAD$95.70The 271 series is designed for surfacing applications that require long reach in hardened materials <65Rc. Engineered robust cutting geometry featuring a large core diameter and slow helix angle to maximize tool life. -
0.5"Øx 0.85" LOC x 4" OAL- Ballnose - TiAlN Coated - 281 2F Carbide Hard Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 0.85"Overall Length: 4"Shank Diameter: 0.5"End Style: BallnoseCAD$74.75The 281 series is designed for surfacing applications in hardened materials <65Rc. Engineered robust cutting geometry featuring a large core diameter and slow helix angle to maximize tool strength. -
0.5"Øx 1" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$53.41The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill With Weldon Flat
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$53.92The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$58.53The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.5"Øx 1" LOC x 3" OAL - 0.03" Rad - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$59.56The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.5"Øx 1" LOC x 3" OAL - 0.03" Rad - TiAlN Coated - Perfect Pitch 5 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$62.02The Perfect Pitch 5 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.5"Øx 1" LOC x 3" OAL - 0.03" Rad - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$50.28The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 1" LOC x 3" OAL - 0.06" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.06" Corner RadiusCAD$53.41The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1" LOC x 3" OAL - 0.06" Rad - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.06" Corner RadiusCAD$58.53The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.5"Øx 1" LOC x 3" OAL - 0.06" Rad - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.06" Corner RadiusCAD$50.28The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 1" LOC x 3" OAL - 0.062" Rad - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.062" Corner RadiusCAD$59.56The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.5"Øx 1" LOC x 3" OAL - 0.09" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.09" Corner RadiusCAD$53.41The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1" LOC x 3" OAL - 0.09" Rad - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.09" Corner RadiusCAD$50.28The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 1" LOC x 3" OAL - 0.125" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.125" Corner RadiusCAD$53.41The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1" LOC x 3" OAL - 0.125" Rad - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.125" Corner RadiusCAD$50.28The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 1" LOC x 3" OAL - ALROC-S Coated - R400 4F Carbide Knuckle Form Roughing End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: ChamferCAD$55.46 -
0.5"Øx 1" LOC x 3" OAL- Ballnose - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$57.50 -
0.5"Øx 1" LOC x 3" OAL- Ballnose - TiAlN Coated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$56.29The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. TiAlN coated to improve tool life in harder to machine materials like... -
0.5"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$42.09The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.5"Øx 1" LOC x 3" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: BallnoseCAD$45.16The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 1" LOC x 3" OAL- Square End - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$51.36The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1" LOC x 3" OAL- Square End - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$55.46The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.5"Øx 1" LOC x 3" OAL- Square End - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$59.56The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.5"Øx 1" LOC x 3" OAL- Square End - TiAlN Coated - Perfect Pitch 5 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$62.02The Perfect Pitch 5 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super... -
0.5"Øx 1" LOC x 3" OAL- Square End - Uncoated - A340 3F Carbide Variable End Mill
Flutes: 3Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$44.14The A340 was developed for maximum performance in aluminum alloys. Featuring specialized variable pitched fluting and wiper geometry for minimized chatter and maximum surface finish.Aggressive flute geometry minimizes spindle load. -
0.5"Øx 1" LOC x 3" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$40.04The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.5"Øx 1" LOC x 3" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 3"Shank Diameter: 0.5"End Style: SquareCAD$40.04The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 1" LOC x 4" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 4"Shank Diameter: 0.5"End Style: BallnoseCAD$49.30The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.5"Øx 1" LOC x 4" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 4"Shank Diameter: 0.5"End Style: SquareCAD$49.30The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.5"Øx 1" LOC x 4" OAL- Square End - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 4"Shank Diameter: 0.5"End Style: SquareCAD$49.30The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 1" LOC x 6" OAL- Ballnose - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 6"Shank Diameter: 0.5"End Style: BallnoseCAD$67.34The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in surfacing applications in softer materials such as aluminum, copper, and even low alloy steels. -
0.5"Øx 1" LOC x 6" OAL- Ballnose - Uncoated - G4 4F Carbide End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 6"Shank Diameter: 0.5"End Style: BallnoseCAD$67.34The G4 series is part of our general purpose line of end mills. The 4 flute geometry is designed for flexibility, excelling in most machining operations in a wide range of materials. -
0.5"Øx 1" LOC x 6" OAL- Square End - Uncoated - G2 2F Carbide End Mill
Flutes: 2Cutting Diameter: 0.5"Length of Cut: 1"Overall Length: 6"Shank Diameter: 0.5"End Style: SquareCAD$67.34The G2 series is part of our general purpose line of end mills. The 2 flute geometry is designed for maximum chip evacuation. It excels in low alloy steels and non-ferrous materials like aluminum in high radial engagement machining strategies like... -
0.5"Øx 1.25" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V438 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1.25"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$54.64The V438 series is a state of the art 4F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. -
0.5"Øx 1.25" LOC x 3" OAL - 0.03" Rad - ALROC-S Coated - V540 5F Carbide Variable End Mill
Flutes: 5Cutting Diameter: 0.5"Length of Cut: 1.25"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$64.16The V540 series is a state of the art 5F end mill featuring full variable flute geometry, eccentric relief, and ALROC-S coating for maximum cutting performance in steels up to 50Rc, cast irons, and super alloys. This tool is particularly suitable for... -
0.5"Øx 1.25" LOC x 3" OAL - 0.03" Rad - TiAlN Coated - Perfect Pitch 4 4F Carbide Variable End Mill
Flutes: 4Cutting Diameter: 0.5"Length of Cut: 1.25"Overall Length: 3"Shank Diameter: 0.5"End Style: 0.03" Corner RadiusCAD$62.12The Perfect Pitch 4 variable pitch geometry is designed to dampen chatter, increasing performance and tool life. Designed with eccentric relief for maximum edge strength and TiAlN coating, perfect pitch end mills excel in stainless steels and super...